Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 96)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

4-14

308628-15.0 Rev 00

Overriding the Local AS Number

By default, a BGP speaker that issues an open message to initiate a peer-to-peer

session uses the AS number that you set with the Local AS parameter.

You can use Site Manager to specify a different AS number (overriding the

default) by completing the following steps:

Specifying a Maximum Update Size

By default, a BGP speaker sends update messages with a maximum size of 800

bytes.

You can reset the maximum update message size.

If the update message that

advertises a single route is larger than the configured message size, the actual

message size can override the configured value.

You can use the BCC or Site Manager to specify a maximum update message size.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BGP

. The BGP menu opens.

4. Choose

Peers

. The IP Interface List for BGP window

opens.

5. Click on the IP interface for which you

want to edit BGP peer parameters.

6. Click on

BGP Peers

. The BGP Peer List window opens.

7. Click on the peer for which you want to

edit parameters.

The parameters for that peer appear in

the window.

8. Set the

Local AS to Advertise to Peer

parameter. Click on

Help

or see the

parameter description on page A-16

9. Click on

Apply

, and then click on

Done

. You return to the IP Interface List for BGP

window.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 275 276

Comentarios a estos manuales

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 96

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)