Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 80

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 276
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 79
Configuring IP Exterior Gateway Protocols (BGP and EGP)
3-36
308628-15.0 Rev 00
To apply a route flap damping template to an existing BGP accept policy,
complete the following steps:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Policy Filters
. The Policy Filters menu opens.
4. Choose
BGP-4
. The BGP-4 menu opens.
5. Choose
Accept Policies
. The BGP4 Accept Policy Filters window
opens.
6. Click on the accept policy to which you
want to apply route flap damping.
The parameter values for that policy
appear in the window.
7. Set the following parameters:
BGP Route Flap Dampening
BGP Route Flap Dampening
Template
Click on
Help
or see the parameter
descriptions beginning on page A-45
.
Note: The BGP Route Flap Dampening
Template parameter is grayed out unless
the BGP Route Flap Dampening
parameter is set to ENABLE.
8. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Vista de pagina 79
1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 275 276

Comentarios a estos manuales

Sin comentarios