Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 198

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 276
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 197
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-24
308628-15.0 Rev 00
BGP Event Message Parameters
Parameter: Peer Local/Remote
Path: Configuration Manager > Protocols > IP > BGP > BGP Debug
Default: 0.0.0.0/0.0.0.0
Options: The IP addresses for the BGP local peer and remote peer
Function: Specifies the IP address of the BGP local peer and the remote peer.
Instructions: To obtain event messages about all connections between all BGP peers, accept
the default value, 0.0.0.0/0.0.0.0. Enter a specific pair of IP addresses to obtain
event messages about connections between the peers with that IP address
combination. To limit the application of the debug attributes to the BGP-4
gateway connections, enter 255.255.255.255 for the remote IP address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.2
Parameter: Message Level
Path: Configuration Manager > Protocols > IP > BGP > BGP Debug
Default: All
Options: All
|
Debug
|
Info
|
Warning
|
Fault
|
Trace
Function: Specifies the severity level of event messages received.
Instructions: Accept the default to obtain event messages of all levels. To select one or more
levels, click on Values.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.4
Parameter: Message Trace Switch
Path: Configuration Manager > Protocols > IP > BGP > BGP Debug
Default: Disable
Options: Disable
|
Open
|
Update
|
Notification
|
Keepalive
Function: Specifies which BGP messages on the specified connection are logged.
Instructions: Use the default or select one or more BGP message types by clicking on Values.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.5.1.5
Vista de pagina 197
1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 275 276

Comentarios a estos manuales

Sin comentarios