
Configuring BGP Accept and Announce Policies
308628-15.0 Rev 00
5-5
For example, the following command sequence causes BGP to accept routes that
match policy_2 and assigns a BGP-4 preference of 10 to routes that match this
policy:
accept/policy_2//jointfilesconvert/97454/bgp#
action accept
accept/policy_2//jointfilesconvert/97454/bgp#
/jointfilesconvert/97454/bgp-4-preference 10
accept/policy_2//jointfilesconvert/97454/bgp#
Using Site Manager
To create a BGP accept policy, complete the following steps:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Policy Filters
. The Policy Filters menu opens.
4. Choose
BGP-4
. The BGP-4 Policies menu opens.
5. Choose
Accept Policies
. The BGP4 Accept Policy Filters window
opens.
6. Click on
Add
. The BGP4 Accept IP Policy Filter
Configuration window opens.
7. Set the following parameters:
• Name
• Action
• Route Preference
• Rule Precedence
• Bgp4 Preference
• AS Weight Class
Click on
Help
or see the parameter
descriptions beginning on page A-30
.
8. Click on
OK
. You return to the BGP4 Accept Policy
Filters window.
Comentarios a estos manuales