Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 207)

Site Manager Parameters

308628-15.0 Rev 00

A-33

Parameter: Route Preference

Path: Configuration Manager > Protocols > IP > Policy Filters > EGP > Accept

Policies

Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-3 > Accept

Policies

Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept

Policies

Default: 1

Options: 1 to 16

Function: Assigns a metric value (the higher the number, the greater the preference) to a

route that the protocol forwards to the routing table manager. If confronted with

multiple routes to the same destination, the routing table manager may need to

use this value to decide which route to insert.

Instructions: Either accept the default value, 1, or enter a new value. Routes for all networks

(0.0.0.0/0.0.0.0) should have the lowest preference and routes for the most

specific networks (longest address and mask) should have the highest

preference.

MIB Object ID: EGP: 1.3.6.1.4.1.18.3.5.3.2.6.5.1.7

MIB Object ID: BGP-3: 1.3.6.1.4.1.18.3.5.3.2.6.7.1.7

MIB Object ID: BGP-4: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.7

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 275 276

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 207