
Site Manager Parameters
308628-15.0 Rev 00
A-5
Parameter: BGP Intra-AS
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Enable
Options: Enable
|
Disable
Function: Specifies whether BGP will perform intra-AS IBGP routing.
Instructions: Transit ASs should use intra-AS routing. Stub or multihomed ASs usually do
not use IBGP intra-AS routing.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.8
Parameter: BGP From Protocols
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: BGP
Options: BGP
|
All
Function: Controls (if intra-AS routing is enabled) the types of routes that BGP advertises
in any IBGP sessions.
Instructions: Select BGP to propagate only advertised routes learned from external BGP
peers. Select All to propagate routes learned from all route sources (excluding
IBGP and OSPF interarea and intra-area routes, which are never advertised with
IBGP).
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.9
Parameter: BGP Interval Timer
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: 5 seconds
Options: 1 to 2,147,483,647
Function: Specifies the minimum time interval, in seconds, between injections of external
BGP routes into the IP routing table.
Instructions: Accept the default or enter a nonzero value.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.10
Comentarios a estos manuales