Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 109)

Configuring BGP Peers

308628-15.0 Rev 00

4-27

Using Site Manager

To set BGP-4 authentication parameters, complete the following steps:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BGP

. The BGP menu opens.

4. Choose

Peers

. The IP Interface List for BGP window

opens.

5. Click on the interface that you want to

edit.

The parameter values for that interface

appear in the window.

6. Click on

BGP Peers

. The BGP Peer List window opens.

7. Click on the peer that you want to edit. The parameter values for that peer appear

in the window.

8. Set the following parameters:

• Tcp Authentication

• Tcp Md5 Key Storage

• Node Protection Key

• Tcp Md5 Key

Click on

Help

or see the parameter

descriptions beginning on page A-18

Note: The Tcp Md5 Key Storage and

Tcp Md5 Key parameters are grayed out

until you select MD5 as the Tcp

Authentication value.

9. Click on

Apply

, and then click on

Done

You return to the IP Interface List for BGP

window.

10. Click on

Done

You return to the Configuration Manager

window.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 275 276

Comentarios a estos manuales

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 109

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)