
Configuring IP Exterior Gateway Protocols (BGP and EGP)
5-20
308628-15.0 Rev 00
Examples
The following command sequence configures the router to advertise updates
authored by BGP peer 1.1.1.1:
announce/pol_3//jointfilesconvert/97454/bgp#
action announce
announce/pol_3//jointfilesconvert/97454/bgp#
match
match//jointfilesconvert/97454/bgp/announce/pol_3#
inbound-peer 1.1.1.1
inbound-peer/1.1.1.1//jointfilesconvert/97454/bgp/announce/pol_3#
The following command sequence configures the router to drop advertisements to
peer 1.1.1.1 if the update includes an AS path that matches 350 or 400:
announce/pol_4//jointfilesconvert/97454/bgp#
action ignore
announce/pol_4//jointfilesconvert/97454/bgp#
match
match//jointfilesconvert/97454/bgp/announce/pol_4#
as-path-pattern “350 400”
match//jointfilesconvert/97454/bgp/announce/pol_4#
outbound-peer 1.1.1.1
outbound-peer/1.1.1.1.//jointfilesconvert/97454/bgp/announce/pol_4#
rip-gateway* List of IP addresses Specifies the addresses of one or more routers
that could send RIP updates to this router. This
policy applies to RIP advertisements from
routers on this list, and applies only to
RIP-sourced routes when RIP is included as a
route source.
rip-interface* List of IP addresses
Specifies the IP addresses of one or more
interfaces on this router. This policy matches
RIP updates received on interfaces that appear
in this list. An empty list indicates that this
policy applies to RIP updates received on any
interface
.
*
This item is a BCC object with parameters of its own. To specify multiple items, create multiple
objects.
Table 5-5. BCC Match Parameters for BGP Announce Policies
(continued)
Parameter Values Function
Comentarios a estos manuales