
Site Manager Parameters
308628-15.0 Rev 00
A-39
Parameter: BGP Communities to match
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-3 > Accept
Policies
Default: An empty list
Options: A list of BGP communities
Function: Specifies one or more BGP communities. This policy applies to all BGP
advertisements that match the list.
Instructions: Supply an octet string using the following format: each community ID is 4 bytes
long; 0 in the two most significant bits causes the router to perform the match on
the lower 16 bits; the default empty list means match any list.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.7.1.16
Comentarios a estos manuales