
Configuring IP Exterior Gateway Protocols (BGP and EGP)
3-34
308628-15.0 Rev 00
3.
Modify the accept policy by entering the following commands:
action accept
route-damping enabled
route-damping-template {default
|
<name>
}
name
is the name of the template that you want to apply to the unstable route.
4.
Match the accept policy to the unstable route.
For instructions, see “
Specifying Match Criteria for a BGP Accept Policy” on
page 5-6.
For example, the following command sequence creates a BGP accept policy
named fred that causes BGP to apply the route flap damping template steady to
updates for network 3.4.0.0:
/jointfilesconvert/97454/bgp#
accept fred
accept/fred//jointfilesconvert/97454/bgp#
action accept
accept/fred//jointfilesconvert/97454/bgp#
route-damping enabled
accept/fred//jointfilesconvert/97454/bgp#
route-damping-template steady
accept/fred//jointfilesconvert/97454/bgp#
match
match//jointfilesconvert/97454/bgp/accept/fred#
network 3.4.0.0/16/exact
network/3.4.0.0/255.255.0.0/exact//jointfilesconvert/97454/bgp/accept/fred#
Comentarios a estos manuales