Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 208

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 276
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 207
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-34
308628-15.0 Rev 00
EGP-Specific Accept Policy Parameters
Parameter: Rule Precedence
Path: Configuration Manager > Protocols > IP > Policy Filters > EGP > Accept
Policies
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-3 > Accept
Policies
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept
Policies
Default: 0
Options: A metric value
Function: Assigns a metric value to this policy (a policy with a higher value takes
precedence over a policy with a lower value).
Instructions: Use this value to specify the order of precedence for policies that match the
same route.
MIB Object ID: EGP: 1.3.6.1.4.1.18.3.5.3.2.6.5.1.8
MIB Object ID: BGP-3: 1.3.6.1.4.1.18.3.5.3.2.6.7.1.8
MIB Object ID: BGP-4: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.8
Parameter: Peer List
Path: Configuration Manager > Protocols > IP > Policy Filters > EGP > Accept
Policies
Default: An empty list
Options: A list of IP addresses
Function: Specifies the IP addresses of one or more EGP peers. This policy applies to
EGP advertisements from the peers on this list.
Instructions: Use the default empty list to indicate that this policy applies to EGP
advertisements from any EGP peer.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.5.1.10
Vista de pagina 207
1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 275 276

Comentarios a estos manuales

Sin comentarios