Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 191

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 276
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 190
Site Manager Parameters
308628-15.0 Rev 00
A-17
Parameter: Peer Route Echo Switch
Path: Configuration Manager > Protocols > IP > BGP > Peers > BGP Peers
Default: Disabled
Options: Enabled
|
Disabled
Function: Controls the way the router echoes a BGP route that is selected for forwarding.
(Echoing in this case means advertising the route back to the peer from which it
was received.) If this parameter is enabled, the router advertises the route back
as reachable and includes the local AS. If this parameter is disabled, the router
echoes the route as unreachable/withdrawn.
A BGP speaker that participates in inter-AS multicast routing must advertise a
route it receives from one of its external peers. If the router stores the route in its
routing table, it must also advertise it back to the peer from which the route was
received.
Instructions: If the peer router saves routes that contain its own AS number and is running
short of memory, send an unreachable echo.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.33
Parameter: Loop Detection
Path: Configuration Manager > Protocols > IP > BGP > Peers > BGP Peers
Default: Enabled
Options: Enabled
|
Disabled
Function: Specifies whether BGP terminates a peer-to-peer session if it discovers a loop in
the AS path.
Instructions: Set this parameter as required.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.41
Vista de pagina 190
1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 275 276

Comentarios a estos manuales

Sin comentarios