Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 159

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 276
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 158
Configuring Route and Traffic Balancing
308628-15.0 Rev 00
7-9
ip#
/jointfilesconvert/97454/bgp
/jointfilesconvert/97454/bgp#
router-id 201.1.1.1
/jointfilesconvert/97454/bgp#
local-as 11
/jointfilesconvert/97454/bgp# multi-hop enabled
/jointfilesconvert/97454/bgp#
peer 201.1.1.1/201.1.1.4 as 12
peer/201.1.1.1/201.1.1.4#
e/jointfilesconvert/97454/bgp-ecmp-method route-balance
peer/201.1.1.1/201.1.1.4# back
/jointfilesconvert/97454/bgp#
Using Site Manager
To configure EBGP ECMP for route or traffic balancing, complete the following
steps:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
BGP
. The BGP menu opens.
4. Choose
Peers
. The IP Interface List for BGP window
opens.
5. Click on the IP interface for which you
want to edit BGP peer parameters.
6. Click on
BGP Peers
. The BGP Peer List window opens.
7. Click on the peer for which you want to
edit parameters.
The parameters for that peer appear in
the window.
8. Set the
Peer EBGP ECMP Method
parameter. Click on
Help
or see the
parameter description on page A-18
.
9. Click on
Apply
, and then click on
Done
. You return to the IP Interface List for BGP
window.
10. Click on
Done
. You return to the Configuration Manager
window.
Vista de pagina 158
1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 275 276

Comentarios a estos manuales

Sin comentarios