Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 190

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 276
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 189
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-16
308628-15.0 Rev 00
Parameter: Min AS Origination Interval
Path: Configuration Manager > Protocols > IP > BGP > Peers > BGP Peers
Default: 15 seconds
Options: A value greater than 0
Function: Determines the minimum amount of time that must elapse between successive
advertisements of update messages that report changes within the advertising
BGP speakers own autonomous system.
Instructions: Enter a value greater than 0 seconds.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.30
Parameter: Local AS to Advertise to Peer
Path: Configuration Manager > Protocols > IP > BGP > Peers > BGP Peers
Default: 0
Options: 0 to 65535
Function: Specifies the AS number that is sent in an open message to this peer.
Instructions: Enter an AS number. To specify the AS number that you set with the BGP Local
AS parameter, use the default.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.31
Parameter: Peer Max Update Size
Path: Configuration Manager > Protocols > IP > BGP > Peers > BGP Peers
Default: 800 bytes
Options: 64 to 4096
Function: Specifies the maximum size (in bytes) of update messages that are sent to this
peer.
Instructions: Accept the default or specify a size. If the size of the update message that
advertises a single route is greater than the configured message size, the actual
message size can exceed the configured value.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.32
Vista de pagina 189
1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 275 276

Comentarios a estos manuales

Sin comentarios