Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 103)

Configuring BGP Peers

308628-15.0 Rev 00

4-21

Configuring Peers over an Unnumbered Point-to-Point Link

You cannot configure a BGP peer-to-peer session directly on an unnumbered

interface. To establish a connection, each side of the connection must be

associated with a numbered interface.

For example, consider the two routers in Figure 4-2

. Routers A and B are

connected by a point-to-point network using unnumbered interfaces. Both routers

are configured with BGP.

Figure 4-2. BGP over an Unnumbered Point-to-Point Link

8. Set the

Loop Detection

parameter. Click

Help

or see the parameter description

on page A-17

9. Click on

Apply

, and then click on

Done

. You return to the IP Interface List for BGP

window.

Site Manager Procedure

(continued)

You do this System responds

Network 1

Point-to-Point

network

Network 3

Router A

Router B

Numbered IP interface configured for a BGP

peer-to-peer connection

Unnumbered IP interface

Peer-to-Peer

connection

Key

IP0049B

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 275 276

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 103