Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 40

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 276
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 39
Configuring IP Exterior Gateway Protocols (BGP and EGP)
2-4
308628-15.0 Rev 00
Deleting BGP with Site Manager
You can delete BGP from all router circuits on which it is currently enabled.
To delete BGP using Site Manager, complete the following steps:
6. Set the following parameters:
Peer Address
Peer AS
Local Address
•Peer Mode
Click on
Help
or see the parameter
descriptions beginning on page A-11.
7. Click on
OK
. Site Manager enables default BGP
service and returns you to the
Configuration Manager window.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
BGP
. The BGP menu opens.
4. Choose
Delete BGP
. Site Manager asks you to confirm the
deletion of BGP.
5. Click on
OK
. Site Manager removes BGP from all circuits
on the router and returns you to the
Configuration Manager window.
Site Manager Procedure
(continued)
You do this System responds
Vista de pagina 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 275 276

Comentarios a estos manuales

Sin comentarios