Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 55

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 276
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 54
Configuring Global BGP Parameters
308628-15.0 Rev 00
3-11
Using Site Manager
To change the minimum number of seconds between route injections, complete
the following steps:
Allowing Redundant Connections
By default, BGP performs redundancy checking on peer-to-peer TCP sessions.
BGP can maintain only one TCP session with a remote BGP peer. If the remote
peer attempts to establish another session on another physical connection, BGP
rejects the session. BGP uses a collision-detection method based on the router ID
to check for redundant sessions.
You can disable redundancy checking to allow TCP sessions with the same remote
peer on multiple physical connections.
The advantage of a peer-to-peer
configuration with multiple sessions on multiple physical connections is
redundancy: if one connection fails, the peers can communicate over another link.
The disadvantage is that such a configuration results in multiple copies of each
route.
You can use the BCC or Site Manager to disable redundancy checking and to
specify the maximum number of redundant routes that BGP allows. By default,
BGP allows up to 255 redundant routes.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
BGP
. The BGP menu opens.
4. Choose
BGP Global
. The Edit BGP Global Parameters window
opens.
5. Set the
BGP Interval Timer
parameter.
Click on
Help
or see the parameter
description on page A-6
.
6. Click on
OK
. You return to the Configuration Manager
window.
Vista de pagina 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 275 276

Comentarios a estos manuales

Sin comentarios