Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 108)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

4-26

308628-15.0 Rev 00

Using the BCC

To set the BGP-4 authentication parameters, go to the BGP peer prompt (for

example,

box; ip; /jointfilesconvert/97454/bgp; peer/2.2.2.2/3.3.3.3

) and enter:

tcp-authentication <state>

state

is either

none

(default) or

md5

For example, the following command enables BGP-4 MD5 authentication on peer

session 2.2.2.2/3.3.3.3:

peer/2.2.2.2/3.3.3.3#

tcp-authentication md5

peer/2.2.2.2/3.3.3.3#

If you do not enable TCP authentication, the other BGP authentication parameters

are irrelevant.

After you enable MD5 authentication, you can configure the other BGP-4

authentication parameters. At the peer prompt, enter:

tcp-md5-key <key>

key

is the value assigned to the MD5 key (no default).

For example, the following command sets the BGP-4 MD5 key to corpkey:

peer/2.2.2.2/3.3.3.3#

tcp-md5-key corpkey

peer/2.2.2.2/3.3.3.3#

You also can specify whether to store the key as clear text or encrypted. At the

peer prompt, enter:

tcp-md5-key-storage <format>

format

is either

clear-text

(default) or

encrypted

For example, the following command sets the BGP-4 MD5 key storage format to

encrypted:

peer/2.2.2.2/3.3.3.3#

tcp-md5-key-storage encrypted

peer/2.2.2.2/3.3.3.3#

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 275 276

Comentarios a estos manuales

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 108

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)