Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 247

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 276
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 246
Site Manager Parameters
308628-15.0 Rev 00
A-73
Parameter: Next Hop
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-3 >
Announce Policies
Default: Null
Options: An IP address
Function: Overrides the Next Hop path attribute with the IP address you specify.
Instructions: To allow the existing Next Hop attribute, use the default null value.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.8.1.28
Parameter: BGP Communities to Match
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-3 > Announce
Policies
Default: An empty list
Options: A list of BGP communities
Function: Specifies one or more BGP communities. This policy applies to all BGP
advertisements that match the list.
Instructions: Supply an octet string using the following format: each community ID is 4 bytes
long; 0 in the two most significant bits causes the router to perform the match on
the lower 16 bits; the default empty list means match any list.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.8.1.31
Vista de pagina 246
1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 275 276

Comentarios a estos manuales

Sin comentarios