
Configuring IP Exterior Gateway Protocols (BGP and EGP)
8-8
308628-15.0 Rev 00
Specifying the Neighbor’s Address
You define the neighbor-to-neighbor relationship by specifying the IP address of
the router that is to be the remote neighbor.
To supply the address of the remote neighbor, complete the following steps:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
EGP
. The EGP menu opens.
4. Choose
Neighbors
. The IP Interface List for EGP window
opens.
5. Click on the IP interface for which you
want to specify the neighbor’s address.
The parameter values for that interface
appear in the window.
6. Click on
EGP Neighbor
. The EGP Neighbors List window opens.
7. Click on
Add
. The EGP Neighbor window opens.
8. Set the
Remote Autonomous System IP
Address
parameter.
Click on
Help
or see
the parameter description on page
A-26
.
9. Click on
OK
. You return to the EGP Neighbors List
window.
10. Click on
Apply
, and then click on
Done
. You return to the IP Interface List for EGP
window.
11. Click on
Done
. You return to the Configuration Manager
window.
Comentarios a estos manuales