
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-78
308628-15.0 Rev 00
Parameter: Local Preference Override Value
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Announce
Policies
Default: Null
Options: Null or a route weight value
Function: Specifies an override value for the Local Preference attribute.
Instructions: Enter a value and set the Local Preference Override parameter to True.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.10.1.29
Parameter: Override Next Hop
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 >
Announce Policies
Default: Null
Options: An IP address
Function: Overrides the Next Hop path attribute with the IP address you specify.
Instructions: To allow the existing Next Hop attribute, use the default null value.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.10.1.30
Parameter: Atomic
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 >
Announce Policies
Default: Default
Options: Default
|
Force
|
Ignore
Function: Allows control over the atomic path attribute.
Instructions: By default, the router automatically sets this attribute if it knows that
certain networks in an aggregate range have not been included in an
aggregate advertisement. To include the atomic attribute even if the router
does not assume one is required, set the parameter to Force.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.10.1.31
Comentarios a estos manuales