Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 87)

Configuring BGP Peers

308628-15.0 Rev 00

4-5

Using the BCC

To set the retry interval, go to a BGP peer prompt (for example,

box; ip; /jointfilesconvert/97454/bgp;

peer/2.2.2.2/2.2.2.3

) and enter

retry

interval>

interval

is the number of seconds (from 1 through 2,147,483,647) between

attempts to initiate a peer-to-peer session. Setting this value to 0 disables attempts

to initiate a peer-to-peer session.

For example, the following command causes BGP to retry every 60 seconds to

establish a peer-to-peer session between IP interfaces 2.2.2.2 and 2.2.2.3:

peer/2.2.2.2/2.2.2.3#

retry 60

peer/2.2.2.2/2.2.2.3#

Using Site Manager

To set the retry interval, complete the following steps:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BGP

. The BGP menu opens.

4. Choose

Peers

. The IP Interface List for BGP window

opens.

5. Click on the IP interface for which you

want to edit BGP peer parameters.

6. Click on

BGP Peers

. The BGP Peer List window opens.

7. Click on the peer for which you want to

edit parameters.

The parameters for that peer appear in

the window.

8. Set the

Connect Retry Timer

parameter.

Click on

Help

or see the parameter

description on page A-14

9. Click on

Apply

, and then click on

Done

. You return to the IP Interface List for BGP

window.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 275 276

Comentarios a estos manuales

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 87

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)