Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 189)

Site Manager Parameters

308628-15.0 Rev 00

A-15

Parameter: Holdtime

Path: Configuration Manager > Protocols > IP > BGP > Peers > BGP Peers

Default: 90 seconds

Options: 0 or any decimal number greater than 2

Function: Specifies the holdtime that will be inserted into an open message. Upon receipt

of the peer’s open message, the lesser of the two holdtimes will be used (this

must be at least 3 seconds). There are two exceptions. If one peer sends a zero

holdtime, then the nonzero holdtime is used. If both peers send zero holdtimes,

then no holdtime is used and no periodic keepalive message is sent. The

calculated holdtime is the amount of time either peer will wait for a keepalive or

update message before declaring the connection down.

Instructions: Either accept the current value or set the parameter to 0 or some value greater

than 2.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.13

Parameter: KeepAlive Timer

Path: Configuration Manager > Protocols > IP > BGP > Peers > BGP Peers

Default: 30 seconds

Options: Any decimal number in the range 1 to 2147483647

Function: Specifies how often keepalive messages will be sent across this peer connection.

Instructions: If a holdtime of 0 is negotiated, no periodic keepalive messages are sent.

Otherwise, the keepalive timer is set to the smaller of this configured value and

one-third of the holdtime. Either accept the current keepalive value or set this

parameter to some value greater than 0.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.15

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 275 276

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 189