Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 133

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 276
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 132
Configuring BGP Accept and Announce Policies
308628-15.0 Rev 00
5-23
as-path-prepend null (default)
List of AS numbers
Specifies AS numbers that BGP adds to an
AS path before it adds the current AS to the
path
atomic-aggregate default (default)
force
ignore
Allows control over the atomic path attribute.
By default, the router automatically sets this
attribute if it knows that certain networks in
an aggregate range have not been included
in an aggregate advertisement
.
local-pref-override
false (default)
true
Indicates whether you are supplying an
override value for the local preference path
attribute in the routing update message. (The
local preference attribute is valid only in an
update advertised to an IBGP peer.) If you
select false, the router uses the IP route
weight value to calculate the local preference
path attribute
.
local-preference
0 (default)
route weight value
Specifies an override value for the local
preference attribute
med 0 (default) to 65535 Specifies a metric for the multiexit
discriminator attribute
med-method none (default)
specified
originating
Indicates whether a multiexit discriminator
metric is to be advertised for a network
matching this policy and, if advertised, what
value to use. Select one of the following:
none
to indicate that no value is to be
advertised.
specified
to indicate that the value you
specify for the
med
parameter is to be
used.
originating
to indicate that the metric
from the originating protocol is to be
used.
This parameter is valid only if the action
parameter is set to announce.
next-hop 0.0.0.0 (default)
IP address
Overrides the next-hop path attribute with the
IP address that you specify
(continued)
Table 5-6. BCC Modification Parameters for BGP Announce Policies
(continued)
Parameter Values Function
Vista de pagina 132
1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 275 276

Comentarios a estos manuales

Sin comentarios