Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 171)

Customizing EGP Services

308628-15.0 Rev 00

8-11

Choosing the Acquisition Mode

In an EGP neighbor relationship, one router is the active neighbor and the other

router is the passive neighbor. The router in the active mode is the initiator.

By default, EGP assumes that the remote router is the active neighbor.

To identify the remote router as the passive neighbor, complete the following

steps:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

EGP

. The EGP menu opens.

4. Choose

Neighbors

. The IP Interface List for EGP window

opens.

5. Click on the IP interface that you want to

edit.

The parameter values for that interface

appear in the window.

6. Click on

EGP Neighbor

. The EGP Neighbors List window opens.

7. Click on the address of the EGP neighbor

that you want to edit.

The parameter values for that neighbor

appear in the window.

8. Set the

Acquisition Mode

parameter.

Click on

Help

or see the parameter

description on page

A-27

9. Click on

Apply

, and then click on

Done

. You return to the IP Interface List for EGP

window.

10. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 275 276

Comentarios a estos manuales

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 171

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)