
Configuring IP Exterior Gateway Protocols (BGP and EGP)
8-6
308628-15.0 Rev 00
Customizing EGP on the Router
You customize EGP on the router by setting EGP global parameters as described
under the following topics:
Enabling and Disabling EGP
When you start EGP on the router, EGP is automatically enabled for operation.
To disable and reenable EGP, complete the following steps:
Topic Page
Enabling and Disabling EGP
8-6
Supplying a Local AS Number 8-7
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
EGP
. The EGP menu opens.
4. Choose
Global
. The Edit EGP Global Parameters window
opens.
5. Set the
Enable
parameter.
Click on
Help
or see the parameter description on page
A-25
.
6. Click on
OK
. You return to the Configuration Manager
window.
Comentarios a estos manuales