
Configuring IP Exterior Gateway Protocols (BGP and EGP)
5-18
308628-15.0 Rev 00
community*
no-export
no-advertise
no-export-subconfed
List of BGP
communities
Specifies a BGP community. This policy
applies to all BGP advertisements that match
one or more communities in the list. Specify
one of the well-known community names
(no-export, no-advertise, no-export-subconfed)
or enter a four-octet community number in the
form
AS_number:value
. Entering 0 in the two
most significant bits causes the router to match
on the lower 16 bits.
egp-as* List of AS numbers Specifies one or more autonomous system
numbers. This policy applies to EGP
advertisements received from EGP peers in an
AS on this list and applies only to EGP-sourced
routes when EGP is included as a route
source.
egp-gateway* List of IP addresses Specifies the IP address of one or more EGP
gateways. This policy applies to EGP
advertisements that use a gateway on this list
as the next hop, and applies only to
EGP-sourced routes when EGP is included as
a route source.
egp-peer* List of IP addresses Specifies the IP address of one or more EGP
peers. This policy applies to EGP
advertisements authored by a router on this
list, and applies only to EGP-sourced routes
when EGP is included as a route source.
inbound-as* List of AS numbers
Specifies a list of AS numbers. If an AS
number is included in this list, this policy
applies to BGP advertisements received from
BGP peers in that AS
.
inbound-peer* List of IP addresses
Specifies the IP address of one or more BGP
peers. This policy applies to BGP
advertisements authored by a router on this
list, and applies only to BGP-sourced routes
when BGP is included as a route source.
(continued)
Table 5-5. BCC Match Parameters for BGP Announce Policies
(continued)
Parameter Values Function
Comentarios a estos manuales