Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 221)

Site Manager Parameters

308628-15.0 Rev 00

A-47

Parameter: Multi-Exit Discriminator Value

Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept

Policies

Default: -1

Options: -1, 0, or a positive number

Function: Specifies the value to use as the multiexit discriminator. This parameter is valid

only if the Action parameter value is Accept and if the Multi-Exit Discriminator

parameter is set to Override or Generate and there is a MED present in the

update.

Instructions: Enter the MED value.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.22

Parameter: Name

Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept

Policies > Route Flap

Default: None

Options: An alphanumeric string up to 20 characters

Function: Identifies the name of the route flap dampening template.

Instructions: Enter a string that uniquely identifies the route flap dampening template.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.3

Parameter: Cutoff Threshold

Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept

Policies > Route Flap

Default: 2000

Options: 1 to 20000

Function: Specifies the maximum threshold for the route penalty value. If the penalty

value rises above the value for this parameter, BGP suppresses the route. The

router increments the penalty value by 1000 for each withdrawal and increments

it by 500 for each reachable announcement.

Instructions: Enter a number for the cutoff penalty value.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.8.1.4

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 275 276

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 221