
Site Manager Parameters
308628-15.0 Rev 00
A-45
Parameter: BGP Community attribute action
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept
Policies
Default: As Is
Options: As Is
|
Remove
|
Append
|
Replace
Function: Specifies the action to take regarding BGP communities specified in an update.
Instructions: Specify one of the following actions:
• As Is (the default): leave the existing BGP community attribute unchanged.
• Remove: delete all BGP communities from an update.
• Append: append to the existing BGP communities the list of communities
specified in the BGP Community to accept parameter.
• Replace: replace existing BGP communities with those specified in the BGP
Community to accept parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.25
Parameter: BGP Route Flap Dampening
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept
Policies
Default: Disable
Options: Enable
|
Disable
Function: Enables or disables route flap dampening. Route flap dampening applies only to
EBGP learned routes.
Instructions: Accept the default, Disable, or specify Enable to enable route flap dampening.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.26
Comentarios a estos manuales