Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 96
- Pagina / 362
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Configuring IP, ARP, RIP, and OSPF Services
3-34
117356-E Rev 00
To configure this parameter for a multinet or multigroup configuration, see
Configuring SMDS.
Enabling Source Routing over a Token Ring Network
The IP router can route over token ring networks that contain one or more source
routing bridges.
In a source routing network, every end station that sends a frame supplies the
frame with the necessary route descriptors so that it can be source routed across
the network. Thus, in order for an IP router to route packets across a source
routing network, the router must act as an end station, supplying route descriptors
for each packet before it sends it onto the network.
With end-station support enabled, an IP router does the following (Figure 3-3
):
1. Receives a packet and determines that the packet’s next hop is located across a
source routing network
2. Adds the necessary routing information field (RIF) information to the packet’s
MAC header
3. Sends the packet onto the network where it is source routed toward the next
hop
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Interfaces
. The IP Interface List window opens.
4. Click on the interface that you want to edit. Site Manager displays the parameter
values for that interface in the IP Interface
List window.
5. Set the
MAC Address
parameter. Click on
Help
or see the parameter description on
page A-10
.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
- Configuring IP, ARP, RIP 1
- Trademarks 2
- Restricted Rights Legend 2
- Statement of Conditions 2
- Contents 5
- 117356-E Rev 00 10
- Before You Begin 17
- Text Conventions 18
- Acronyms 19
- Related Publications 21
- How to Get Help 22
- Chapter 1 23
- IP Addresses 24
- Subnet Addressing 26
- Supernet Addressing 29
- Autonomous Systems 30
- Figure 1-4. ARP Example 32
- OSPF Neighbors 35
- Neighbor Adjacencies 35
- Designated Routers 36
- OSPF Areas 37
- OSPF Router Types 39
- AS External Routes 39
- OSPF Implementation Notes 40
- Router Discovery Protocol 41
- Route Preferences 41
- Route Weights 42
- Figure 1-6. IP Routing Table 44
- IP Traffic Filters 47
- Chapter 2 49
- Starting IP Services 49
- Starting RIP 51
- Starting OSPF 52
- Starting Router Discovery 52
- Adding RIP to an IP Interface 55
- RIP advertises subnets 61
- Chapter 3 63
- Caution: 80
- Customizing an IP Interface 82
- Configuring an SMDS Address 98
- Using the BCC 101
- Using Site Manager 102
- Deleting IP from an Interface 105
- Defining a Static Route 109
- (continued) 111
- (continued) 112
- Choosing a Broadcast Type 115
- Chapter 4 119
- <state> 120
- Figure 4-1. Proxy ARP Example 125
- Chapter 5 131
- Customizing RIP Services 131
- Defining a RIP Accept Policy 154
- Chapter 6 171
- Customizing OSPF Services 171
- Figure 6-1. OSPF ASE Routes 179
- Specifying the Metric Cost 203
- Appendix A 241
- Site Manager Parameters 241
- IP Parameters 242
- IP Interface Parameters 244
- IP Global Parameters 259
- Static Route Parameters 266
- Adjacent Host Parameters 270
- Router Discovery Parameters 273
- OSPF Parameters 275
- OSPF Interface Parameters 280
- OSPF Area Parameters 289
- Area Range Parameters 293
- OSPF NSSA Range Parameters 296
- RIP Parameters 302
- Appendix B 309
- Routing Policy Parameters 309
- RIP Accept Policy Parameters 313
- OSPF Accept Policy Parameters 314
- Appendix C 331
- RIP Export Filters 335
- OSPF Import Filters 338
- OSPF Export Filters 339
- Appendix D 343
- Route Weight Worksheet 343
- Appendix E 347
- IP/OSPF Configuration Example 347
- Area 0.0.0.1STUB area 0.0.0.2 348
- Backbone 0.0.0.0 348
Relacionado con productos y manuales para Redes Avaya Configuring IP, ARP, RIP, and OSPF Services
Redes Avaya (109351-F Manual de usuario
(136 paginas)
(136 paginas)
Redes Avaya B179 Nota de aplicación
(35 paginas)
(35 paginas)
Redes Avaya BCM200/400 Manual de instalación
(445 paginas)
(445 paginas)
Redes Avaya Call Center Reporting Manual de usuario
(99 paginas)
(99 paginas)
Redes Avaya BCM450 Guía de configuración
(13 paginas)
(13 paginas)
Redes Avaya BayRS Version 13.20 Manual de usuario
(134 paginas)
(134 paginas)
Redes Avaya Event Messages for Routers Manual de usuario
(928 paginas)
(928 paginas)
Redes Avaya Bell Canada SIP Trunking Service with Business Communication Manager 450 Nota de aplicación
(45 paginas)
(45 paginas)
Redes Avaya R2 Guía de instalación
(147 paginas)
(147 paginas)
Redes Avaya BayRS, BCC, and Site Manager Software Version 15.1.0.0 Fixed Anomalies Manual de usuario
(26 paginas)
(26 paginas)
Redes Avaya Configuring ATM Services Manual de usuario
(262 paginas)
(262 paginas)
Redes Avaya BayRs Version 12.20 aviso
(54 paginas)
(54 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.076 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales