Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 274

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 362
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 273
Configuring IP, ARP, RIP, and OSPF Services
A-34
117356-E Rev 00
Parameter: Maximum Interval
Path: Configuration Manager > Protocols > IP > Router Discovery
Default: 600
Options: 4 to 1800
Function: Specifies the maximum time interval in seconds between advertisements.
Instructions: Specify a value from 4 through 1800 seconds that is greater than the value you
specified for the Minimum Interval parameter, and is no greater than 1800
seconds.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.17.1.7
Parameter: Lifetime
Path: Configuration Manager > Protocols > IP > Router Discovery
Default: 1,800
Options: A value specifying the number of seconds
Function: Specifies the maximum length of time that the advertised addresses are to be
considered as valid router addresses by hosts, in the absence of further
advertisements.
Instructions: Specify a value that is no less than the value you set for the Maximum Interval
parameter and no greater than 9000 seconds.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.17.1.8
Parameter: Interface Preference
Path: Configuration Manager > Protocols > IP > Router Discovery
Default: 0
Options: A numeric value
Function: Specifies the preference value (a higher number indicates more preferred) of the
address as a default router address, relative to other router addresses on the same
subnet.
Instructions: Enter a value indicating the relative preference of the router address. Enter a
preference value of 0x80000000 to indicate to neighboring hosts that the
address is not to be used as a default route.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.17.1.9
Vista de pagina 273
1 2 ... 269 270 271 272 273 274 275 276 277 278 279 ... 361 362

Comentarios a estos manuales

Sin comentarios