Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 79

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 362
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 78
Configuring and Customizing IP
117356-E Rev 00
3-17
To specify the maximum number of equal-cost paths for OSPF, navigate to the IP
global prompt (for example,
box; ip) and enter:
ospf-max-paths
<max_number>
max_number
is an integer from 1 (the default) through 5.
For example, the following command sequence enables round-robin ECMP
routing and allows up to five distribution paths for RIP and OSPF:
ip# ecmp-method roundRobin
ip# rip-max-paths 5
ip# ospf-max-paths 5
Using Site Manager
To enable or disable equal-cost multipath support and to specify the maximum
number of RIP and OSPF routes, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Global
. The Edit IP Global Parameters window
opens.
4. Set the following parameters:
Multiple Nexthop Calculation
Method
RIP Maximum Equal Cost Paths
IP OSPF Maximum Path
Click on
Help
or see the parameter
descriptions beginning on page A-25
.
5. Click on
OK
. You return to the Configuration Manager
window.
Vista de pagina 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 361 362

Comentarios a estos manuales

Sin comentarios