
Configuring IP, ARP, RIP, and OSPF Services
3-32
117356-E Rev 00
Using Site Manager
To enable or disable all-subnet broadcasting, complete the following tasks:
Disabling UDP Checksum Processing on an Interface
By default, UDP checksum processing is enabled on this interface. All outgoing
and incoming UDP datagrams are subject to checksum processing. You can use
the BCC or Site Manager to turn this feature on and off as required. Use the
default in virtually all instances. Disable UDP checksum processing to provide
backward compatibility with UNIX BSD 4.1.
Using the BCC
To disable or reenable UDP checksum processing, navigate to an IP interface
prompt (for example,
box; eth 2/2; ip/2.2.2.2/255.255.0.0
) and enter:
udp-checksum
<state>
state
is one of the following:
enabled
(default)
disabled
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Interfaces
. The IP Interface List window opens.
4. Click on the interface that you want to edit. Site Manager displays the parameter
values for that interface in the IP Interface
List window.
5. Set the
ASB
parameter. Click on
Help
or
see the parameter description on page
A-7
.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Comentarios a estos manuales