Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 159

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 362
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 158
Customizing RIP Services
117356-E Rev 00
5-29
Using Site Manager
To specify a modification value to an update that matches a policy, complete the
following tasks:
Specifying Matching Criteria for a RIP Accept Policy
You can use the BCC or Site Manager to specify matching criteria for a policy.
Using the BCC
To specify matching criteria for an accept policy, navigate to the policy prompt
(for example,
box; ip; rip; accept/pol_1
) and enter:
match
A match prompt appears for the policy.
To specify matching criteria, enter:
<match_criterion> <ip_address>
match_criterion
is one of the BCC match objects listed in Table 5-3.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Policy Filters
. The IP policies menu opens.
4. Choose
RIP.
The RIP policies menu opens.
5. Choose
Accept Policies
. The RIP Accept Policy Filters window
opens.
6. Select the policy that you want to edit.
7. Set the
Apply Subnet Mask
parameter. Click on
Help
or see the
parameter description on page B-6.
8. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Vista de pagina 158
1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 361 362

Comentarios a estos manuales

Sin comentarios