Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 88

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 362
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 87
Configuring IP, ARP, RIP, and OSPF Services
3-26
117356-E Rev 00
Using the BCC
To specify the cost of an IP interface, navigate to an IP interface prompt (for
example,
box; eth 2/2; ip/2.2.2.2/255.255.0.0
) and enter:
cost
<cost>
cost
is an integer indicating the cost of interface, from 1 through 127.
For example, the following command assigns a cost of 2 to IP interface 2.2.2.2:
ip/2.2.2.2# cost 2
ip/2.2.2.2#
Using Site Manager
To specify the cost of an IP interface, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Interfaces
. The IP Interface List window opens.
4. Click on the interface that you want to edit. Site Manager displays the parameter
values for that interface in the IP Interface
List window.
5. Set the
Cost
parameter. Click on
Help
or
see the parameter description on page
A-5
.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Vista de pagina 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 361 362

Comentarios a estos manuales

Sin comentarios