
Configuring and Customizing IP
117356-E Rev 00
3-29
Using the BCC
To enable or disable ICMP address-mask reply messages, navigate to an IP
interface prompt (for example,
box; eth 2/2; ip/2.2.2.2/255.255.0.0
) and enter:
mask-reply
<state>
state
is one of the following:
enabled
disabled
(default)
For example, the following command causes IP to send ICMP address-mask reply
messages on interface 2.2.2.2:
ip/2.2.2.2# mask-reply enabled
ip/2.2.2.2#
Using Site Manager
To enable or disable ICMP address-mask reply messages, complete the following
tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Interfaces
. The IP Interface List window opens.
4. Click on the interface that you want to edit. Site Manager displays the parameter
values for that interface in the IP Interface
List window.
5. Set the
AMR
parameter. Click on
Help
or
see the parameter description on page
A-6
.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Comentarios a estos manuales