Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 103

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 362
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 102
Configuring and Customizing IP
117356-E Rev 00
3-41
Specify (for a server) the duration for which the registration is valid.
Using the BCC
To set parameters for an ATM logical IP subnet, navigate to an IP interface
prompt on a classical IP service record (for example,
box; atm/11/1;
classical-ip-service/paris; ip/2.2.2.2/255.255.0.0
) and enter:
arp-mode
<mode>
mode
is one of the following:
client (default)
server
To specify the ATM address of an ATMARP server, enter:
atmarp-server-address
<address>
address
is an ATM hexadecimal address (40 characters).
To specify a server registration interval, enter:
atmarp-server-interval
<interval>
interval
is any integer. The default value for a client is 900 seconds; for a server,
1200 seconds.
To disable or reenable timing out of the connection to the ATMARP server, enter:
atmarp-server-aging
<state>
state
is either:
enabled (default)
disabled
Vista de pagina 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 361 362

Comentarios a estos manuales

Sin comentarios