Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 302

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 362
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 301
Configuring IP, ARP, RIP, and OSPF Services
A-62
117356-E Rev 00
RIP Parameters
Parameter: Enable
Path: Configuration Manager > Protocols > IP > RIP Interfaces
Default: Enable
Options: Enable
|
Disable
Function: Specifies whether the Routing Information Protocol (RIP) is enabled on this
interface.
Instructions: Select Enable to enable RIP on this interface. Select Disable to disable RIP on
this interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.2.2.1.2
Parameter: RIP Supply
Path: Configuration Manager > Protocols > IP > RIP Interfaces
Default: Enable
Options: Enable
|
Disable
Function: Specifies whether the interface transmits periodic RIP updates to
neighboring networks.
Instructions: Select Enable to configure the interface to transmit RIP updates. Select
Disable to prohibit the interface from transmitting RIP updates.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.2.2.1.5
Vista de pagina 301
1 2 ... 297 298 299 300 301 302 303 304 305 306 307 ... 361 362

Comentarios a estos manuales

Sin comentarios