Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 206

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 362
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 205
Configuring IP, ARP, RIP, and OSPF Services
6-36
117356-E Rev 00
Using the BCC
To specify the MTU size, navigate to an OSPF interface prompt (for example,
box; eth 2/2; ip/2.2.2.2/255.255.0.0; ospf
) and enter:
mtu <
size>
size
is the MTU size in bytes.
Using Site Manager
Using Site Manager, you can configure OSPF to do the following:
Send packets no larger than the IP MTU size for Ethernet (1500).
Use the MTU size that you specify. The number you enter must be less than
the IP MTU size for that physical interface.
To specify the MTU size, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
OSPF/MOSPF
. The OSPF/MOSPF menu opens.
4. Choose
Interfaces
. The OSPF Interfaces window opens.
5. Click on the OSPF interface that you want
to edit.
The parameter values for that interface
appear in the OSPF Interfaces window.
6. Set the
MTU Size
parameter. Click on
Help
or see the parameter description on
page A-46
.
7. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Vista de pagina 205
1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 361 362

Comentarios a estos manuales

Sin comentarios