Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario descargar pdf (Pagina 95)

Configuring and Customizing IP

117356-E Rev 00

3-33

For example, the following command turns off UDP checksum processing on IP

interface 2.2.2.2:

ip/2.2.2.2# udp-checksum disabled

ip/2.2.2.2#

Using Site Manager

To disable or reenable UDP checksum processing, complete the following tasks:

Specifying a MAC Address or E.164 Address

You can use Site Manager to specify a MAC address or an E.164 address for this

interface. Table 3-3

lists the valid settings for the MAC Address parameter.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

Interfaces

. The IP Interface List window opens.

4. Click on the interface that you want to edit. Site Manager displays the parameter

values for that interface in the IP Interface

List window.

5. Set the

Udp Xsum On

parameter. Click on

Help

or see the parameter description on

page A-10

6. Click on

Apply

, and then click on

Done

. You return to the Configuration Manager

window.

Table 3-3. MAC Address Parameter Settings

Value Meaning

0 The IP router uses its IP address and the circuit’s MAC address when

transmitting packets on this interface.

User-specified

MAC address

The IP router uses its IP address and this MAC address when

transmitting and receiving packets on this interface.

E.164 address If the interface is on an SMDS circuit, by default IP uses the individual

SMDS-configured address. You can enter the entire E.164 address --

for example, C1 617 555 5000 FFFF.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 361 362

Comentarios a estos manuales

Sin comentarios

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 95

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring IP, ARP, RIP, and OSPF Services