Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 287

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 362
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 286
Site Manager Parameters
117356-E Rev 00
A-47
Neighbor Parameters for an NBMA Interface
Parameter: MTU Mismatch Detect Enable
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Interfaces
Default: Enabled
Options: Enabled
|
Disabled
Function: Controls the interpretation of the MTU field in the database description packet
header. According to RFC 2178, the MTU indicates the largest size IP packet
that an OSPF interface can receive. If the MTU is greater than that which the
interface can receive, the packet is ignored, and an adjacency is not formed. In
RFC 1583 this field does not exist.
Instructions: The value Enabled specifies RFC 2178 processing of the MTU field. The value
Disabled specifies RFC 1583 processing.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.5.1.34
Parameter: Neighbor’s IP Address
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Interfaces >
Neighbors > Add
Default: None
Options: IP address of the neighbor
Function: Specifies the IP address of an NBMA neighbor for this interface.
Instructions: Enter the appropriate IP address in dotted-decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.7.1.4
Vista de pagina 286
1 2 ... 282 283 284 285 286 287 288 289 290 291 292 ... 361 362

Comentarios a estos manuales

Sin comentarios