Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario descargar pdf (Pagina 72)

100

101

Configuring IP, ARP, RIP, and OSPF Services

3-10

117356-E Rev 00

Using Site Manager

To set the TTL value, complete the following tasks:

Allowing an All-Zero or All-One Subnet Address

By default, an IP address with a subnet portion of all zeros or all ones is an illegal

address.

You can configure IP to allow an all-zero or all-one subnet address. Enable this

feature with caution, however, for it can result in an ambiguous address. For

example, if an all-zero subnet address and an all-zero broadcast address are both

valid, the router cannot distinguish an all-subnets broadcast from a directed

broadcast for the zero subnet.

Using the BCC

To allow an all-zero or all-one subnet address, navigate to the IP global prompt

(for example,

box; ip

) and enter:

all-subnets enabled

For example:

ip#

all-subnets enabled

ip#

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

Global

. The Edit IP Global Parameters window

opens.

4. Set the

Default TTL

parameter. Click on

Help

or see the parameter description on

page A-21

5. Click on

. You return to the Configuration Manager

window.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 361 362

Comentarios a estos manuales

Sin comentarios

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 72

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring IP, ARP, RIP, and OSPF Services