Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario descargar pdf (Pagina 339)

Import and Export Route Filters

117356-E Rev 00

C-9

OSPF Export Filters

Parameter: Preference

Path: Configuration Manager > Protocols > IP > Route Filters > OSPF > Import

Filters

Default: 0

Options: 0 to 16

Function: Assigns a weighted preference value to a route included in the routing tables. If

confronted with multiple routes to the same destination, the router, by default,

grants preference to routes in the following order: direct, OSPF internal, static,

BGP-3, OSPF external, EGP, and RIP.

Instructions: If this hierarchy is acceptable, accept the default value, 0. If you want to grant

preference to this OSPF-derived route, assign a new preference value from 1

through 16 (the greater the number, the higher the preference). Routes for all

networks (0.0.0.0/0.0.0.0) should have the lowest preference. Routes for the

most specific networks (longest address and mask) should have the highest

preference. The default preference for static routes is 0, but it may be set to any

value from 0 through 16. If you want to grant an OSPF-derived route preference

over a static route, make sure that the preference value you assign to the

OSPF-derived route is greater than the preference value of the static route that

you want it to override.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.10.1.6

Parameter: Export Address

Path: Configuration Manager > Protocols > IP > Route Filters > OSPF > Export Filters

Default: 0.0.0.0

Options: Any IP network address

Function: Identifies, by IP address, the network to which this filter applies. If set to 0.0.0.0,

the filter applies to all networks.

Instructions: Enter the appropriate IP address in dotted-decimal notation.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.11.1.3

1 2 ... 334 335 336 337 338 339 340 341 342 343 344 ... 361 362

Sin comentarios

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 339