Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario descargar pdf (Pagina 53)

100

101

Starting IP Services

117356-E Rev 00

2-5

Using Site Manager

You can use Site Manager to start IP, RIP, and OSPF, and to configure a circuitless

IP interface and an unnumbered interface. The following sections provide

instructions.

Starting IP

Before you can select a protocol to run on the router, you must first configure a

circuit that the protocol can use as an interface to an attached network. For

information and instructions, see Configuring WAN Line Services and Configuring

Ethernet, FDDI, and Token Ring Services.

When you have successfully configured the circuit, the Select Protocols window

opens. To start IP, complete the following tasks:

Topic Page

Starting IP

2-5

Starting RIP 2-6

Starting OSPF 2-8

Configuring a Circuitless IP Interface 2-9

Configuring an Unnumbered IP Interface 2-11

Site Manager Procedure

You do this System responds

1. In the Select Protocols window, select

Then click on

The IP Configuration window opens.

2. Set the following parameters:

•

IP Address

•

Subnet Mask

•

Transmit Bcast Addr

•

UnNumbered Assoc Address

Click on

Help

or see the parameter

descriptions beginning on page A-2.

3. Click on

. You return to the Configuration Manager

window.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 361 362

Comentarios a estos manuales

Sin comentarios

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 53

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring IP, ARP, RIP, and OSPF Services