Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 104

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 362
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 103
Configuring IP, ARP, RIP, and OSPF Services
3-42
117356-E Rev 00
Using Site Manager
To set parameters for an ATM logical IP subnet, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Interfaces
. The IP Interface List window opens.
4. Click on the interface that you want to edit. Site Manager displays the parameter
values for that interface in the IP Interface
List window.
5. Set the following parameters:
ATM ARP Mode
ARP Server ATM Address Network
Prefix
ARP Server ATM Address User Part
Registration Refresh Interval
Click on
Help
or see the parameter
descriptions beginning on page A-17
.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Vista de pagina 103
1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 361 362

Comentarios a estos manuales

Sin comentarios