Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario descargar pdf (Pagina 207)

Customizing OSPF Services

117356-E Rev 00

6-37

Configuring a Neighbor on an NBMA Interface

In a nonbroadcast multi-access network, neighbors are not learned dynamically.

You can use the BCC or Site Manager to enable and disable the neighbor

configuration, supply the IP address for each neighbor, and specify the neighbor’s

priority. To configure a neighbor, the OSPF interface type must be set to NBMA

(see “

Specifying the Interface Type” on page 6-21).

To configure an OSPF neighbor on an NBMA interface, complete the following

tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

OSPF/MOSPF

. The OSPF/MOSPF menu opens.

4. Choose

Interfaces

. The OSPF Interfaces window opens.

5. Click on the OSPF interface to which you

want to add a neighbor.

The parameter values for that interface

appear in the OSPF Interfaces window.

6. Click on

Neighbors

. The OSPF Neighbors window opens.

7. Click on

Add

. The OSPF Neighbor Configuration

window opens.

8. Set the

Neighbor’s IP Address

parameter. Click on

Help

or see the

parameter description on page A-47

9. Click on

. You return to the OSPF Neighbors

window.

10. Set the following parameters:

•

Enable

•

Priority

Click on

Help

or see the parameter

descriptions beginning on page A-48.

11. Click on

Apply

, and then click on

Done

. You return to the OSPF Interfaces

window.

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 361 362

Comentarios a estos manuales

Sin comentarios

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 207

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring IP, ARP, RIP, and OSPF Services