Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 111
- Pagina / 362
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Configuring and Customizing IP
117356-E Rev 00
3-49
For example, the following command line configures a static route to destination
3.2.4.5/255.255.0.0:
ip# static-route address 3.2.4.5 mask 255.255.0.0 next-hop-address 2.2.2.4
static-route/3.2.4.5/255.255.0.0/2.2.2.4#
Table 3-5. BCC Static Route Parameters
Parameter Values/Defaults Meaning/Instructions
state enabled (default)
disabled
Specifies the state (active or inactive) of the
static route record in the IP routing tables.
Select disabled to make the static route
record inactive in the IP routing table; the IP
router will not consider this static route.
Select enabled to make the static route
record active again in the IP routing table.
address The destination IP
address you supplied
when you configured
the static route. You
cannot modify this
address.
Specifies the IP address of the network to
which you want to configure the static route.
Enter the destination IP address in
dotted-decimal notation. To configure a
default route, enter 0.0.0.0. To configure a
black hole static route, enter a supernet
address. You can configure up to 12 static
routes to the same destination.
mask The destination IP
address mask you
supplied when you
configured the static
route. You cannot
modify this address
mask.
Specifies the subnet mask of the
destination network. Enter the subnet or
supernet mask in dotted-decimal notation.
To configure a default route, enter 0.0.0.0.
To configure a black hole static route, enter
a supernet mask
.
next-hop-address The next-hop IP
address mask you
supplied when you
configured the static
route. You cannot
modify this address
mask.
Specifies the IP address of the next-hop
router. Enter the IP address in
dotted-decimal notation. To configure a
black hole static route, enter
255.255.255.255. If you are configuring a
static route to an unnumbered interface,
enter 0.0.0.0
.
next-hop-mask IP address mask Specifies the subnet mask of the next-hop
router.
(continued)
- Configuring IP, ARP, RIP 1
- Trademarks 2
- Restricted Rights Legend 2
- Statement of Conditions 2
- Contents 5
- 117356-E Rev 00 10
- Before You Begin 17
- Text Conventions 18
- Acronyms 19
- Related Publications 21
- How to Get Help 22
- Chapter 1 23
- IP Addresses 24
- Subnet Addressing 26
- Supernet Addressing 29
- Autonomous Systems 30
- Figure 1-4. ARP Example 32
- OSPF Neighbors 35
- Neighbor Adjacencies 35
- Designated Routers 36
- OSPF Areas 37
- OSPF Router Types 39
- AS External Routes 39
- OSPF Implementation Notes 40
- Router Discovery Protocol 41
- Route Preferences 41
- Route Weights 42
- Figure 1-6. IP Routing Table 44
- IP Traffic Filters 47
- Chapter 2 49
- Starting IP Services 49
- Starting RIP 51
- Starting OSPF 52
- Starting Router Discovery 52
- Adding RIP to an IP Interface 55
- RIP advertises subnets 61
- Chapter 3 63
- Caution: 80
- Customizing an IP Interface 82
- Configuring an SMDS Address 98
- Using the BCC 101
- Using Site Manager 102
- Deleting IP from an Interface 105
- Defining a Static Route 109
- (continued) 111
- (continued) 112
- Choosing a Broadcast Type 115
- Chapter 4 119
- <state> 120
- Figure 4-1. Proxy ARP Example 125
- Chapter 5 131
- Customizing RIP Services 131
- Defining a RIP Accept Policy 154
- Chapter 6 171
- Customizing OSPF Services 171
- Figure 6-1. OSPF ASE Routes 179
- Specifying the Metric Cost 203
- Appendix A 241
- Site Manager Parameters 241
- IP Parameters 242
- IP Interface Parameters 244
- IP Global Parameters 259
- Static Route Parameters 266
- Adjacent Host Parameters 270
- Router Discovery Parameters 273
- OSPF Parameters 275
- OSPF Interface Parameters 280
- OSPF Area Parameters 289
- Area Range Parameters 293
- OSPF NSSA Range Parameters 296
- RIP Parameters 302
- Appendix B 309
- Routing Policy Parameters 309
- RIP Accept Policy Parameters 313
- OSPF Accept Policy Parameters 314
- Appendix C 331
- RIP Export Filters 335
- OSPF Import Filters 338
- OSPF Export Filters 339
- Appendix D 343
- Route Weight Worksheet 343
- Appendix E 347
- IP/OSPF Configuration Example 347
- Area 0.0.0.1STUB area 0.0.0.2 348
- Backbone 0.0.0.0 348
Relacionado con productos y manuales para Redes Avaya Configuring IP, ARP, RIP, and OSPF Services
Redes Avaya (109351-F Manual de usuario
(136 paginas)
(136 paginas)
Redes Avaya B179 Nota de aplicación
(35 paginas)
(35 paginas)
Redes Avaya BCM200/400 Manual de instalación
(445 paginas)
(445 paginas)
Redes Avaya Call Center Reporting Manual de usuario
(99 paginas)
(99 paginas)
Redes Avaya BCM450 Guía de configuración
(13 paginas)
(13 paginas)
Redes Avaya BayRS Version 13.20 Manual de usuario
(134 paginas)
(134 paginas)
Redes Avaya Event Messages for Routers Manual de usuario
(928 paginas)
(928 paginas)
Redes Avaya Bell Canada SIP Trunking Service with Business Communication Manager 450 Nota de aplicación
(45 paginas)
(45 paginas)
Redes Avaya R2 Guía de instalación
(147 paginas)
(147 paginas)
Redes Avaya BayRS, BCC, and Site Manager Software Version 15.1.0.0 Fixed Anomalies Manual de usuario
(26 paginas)
(26 paginas)
Redes Avaya Configuring ATM Services Manual de usuario
(262 paginas)
(262 paginas)
Redes Avaya BayRs Version 12.20 aviso
(54 paginas)
(54 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.449 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales