
Configuring IP, ARP, RIP, and OSPF Services
A-52
117356-E Rev 00
Parameter: NSSA Originate Def Route
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Areas
Default: Disable
Options: Enable
|
Disable
Function: Enables or disables the origination of a type 7 default route by an NSSA
internal AS boundary router.
Instructions: Set to Enable if you want the AS boundary router to originate a type 7
default route. Otherwise, accept the default, Disable. You must set this
parameter to Enable to enter values for the NSSA Propagate Def Route and
NSSA Def Route Type parameters.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.2.1.13
Parameter: NSSA Propagate Def Route
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Areas
Default: Disable
Options: Enable
|
Disable
Function: Specifies whether the propagate bit is set in the type 7 default route LSAs
originated by an internal AS boundary router. If this parameter is set to
Enable, type 7 default route LSAs can be translated into type 5 default route
LSAs and flooded to all non-stub areas. If the propagate bit is not set in a
type 7 LSA, the translator ignores the LSA.
Instructions: Set to Enable if you want the propagate bit set in type 7 default route LSAs.
Otherwise, accept the default, Disable. To use this parameter, you must first
set the NSSA Originate Def Route parameter to Enable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.2.1.14
Comentarios a estos manuales