Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 137

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 362
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 136
Customizing RIP Services
117356-E Rev 00
5-7
To specify a password, enter:
authentication
<password>
For example, the following command sequence enables authentication and sets the
password to “secret” on IP interface 2.2.2.2:
rip/2.2.2.2# authentication-type simple
rip/2.2.2.2# authentication secret
Using Site Manager
To configure authentication for RIP Version 2, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
RIP Interfaces
. The IP RIP Interface Configuration
window opens.
4. Click on the RIP interface that you want to
edit.
The parameter values for that interface
appear in the IP RIP Interface
Configuration window.
5. Set the following parameters:
Authentication Type
Authentication Password
Click on
Help
or see the parameter
descriptions beginning on page A-67
.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Vista de pagina 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 361 362

Comentarios a estos manuales

Sin comentarios