Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 269

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 362
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 268
Site Manager Parameters
117356-E Rev 00
A-29
Parameter: Preference
Path: Configuration Manager > Protocols > IP > Static Routes
Default: 16
Options: 1 to 16
Function: Specifies a weighted value (from 1 to 16, with 16 being the most preferred) that
the IP router uses to select a route when its routing tables contain multiple routes
to the same destination.
Instructions: Enter a value from 1 to 16 for this static route. To configure a black hole static
route, enter the maximum preference value.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.8
Parameter: Unnumbered CCT Name
Path: Configuration Manager > Protocols > IP > Static Routes
Default: None
Options: A valid circuit name
Function: Specifies the local router circuit associated with the static route over an
unnumbered interface.
Instructions: An entry for a route using an unnumbered interface must include the circuit
associated with the interface. Use this parameter to specify that circuit name.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.11
Vista de pagina 268
1 2 ... 264 265 266 267 268 269 270 271 272 273 274 ... 361 362

Comentarios a estos manuales

Sin comentarios